Line Master circular guide for compass sawing Made from fibre-glass reinforced plastic to protect the surface of the work. For sawing circles and arcs. Suitable for all commercially available compass saws. Supplied without compass saw....more info...less info
Made from fibre-glass reinforced plastic fo protect the surface of the work. Now also suitable for circular milling. Suitable for all commercially available routers....more info...less info
The very tough tension ratchet makes this nylon belt so perfect for laying laminate, parquet and even for wood panelling, etc. Length 5mtr...more info...less info
Just screw down the work-frames, etc. to the workbench, install the tube of your infinite clamps and screw down the threaded screws that are supplied. Pack with 4 holding clamps (sufficient for 2 infinite clamps)....more info...less info
Mitre-box for the reliable and precise guiding of handsaws. The mitre is set via a rotary disk with locking mechanism. The following mitre angles can be set precisely: 15°, 22,5°, 30°, 36°, 45°, 60° and 90°. The rigid saw shaft of steel ensures reliable guiding of the hand saw. The rapid clamping system for the workpiece with rubber-coated clamping jaws holds workpieces of up to 10 cm (4") thickness/width firmly during sawing. No marks in the workpiece, no "slipping" of the saw. Able to be secured to the table or workbench with screws or with the C-clamps as supplied....more info...less info
Practical help for sawing, planing and drilling. Even long or bulky workpieces can be clamped safely in this device for easy working. Jaw width 225mm, clamp depth approx. 230mm. Simply screw on below your work bench....more info...less info
Convenient clamping and releasing with one hand With a single-handed clamping device, you always have one hand free. The single-handed clamping enables gradual opening using one hand. Secure fixing of workpiece. Ergonomic handle design for safe and effortless work. Award-winning functional design. Hard-wearing due to use of resilient special plastic. The force intensification device raises the applied pressure to over 1000 N (100 kg.)...more info...less info
Convenient clamping and releasing with one hand With a single-handed clamping device, you always have one hand free. The single-handed clamping enables gradual opening using one hand. Secure fixing of workpiece. Ergonomic handle design for safe and effortless work. Award-winning functional design. Hard-wearing due to use of resilient special plastic. The force intensification device raises the applied pressure to over 1000 N (100 kg.)...more info...less info
Convenient clamping and releasing with one hand With a single-handed clamping device, you always have one hand free. The single-handed clamping enables gradual opening using one hand. Secure fixing of workpiece. Ergonomic handle design for safe and effortless work. Award-winning functional design. Hard-wearing due to use of resilient special plastic. The force intensification device raises the applied pressure to over 1000 N (100 kg.)...more info...less info
Allows accurate cutting of angles and diagonals on both sides, smoothly graduated from 0°- 45°. Particularly precise angle setting Fixed cutting angle (both sides) 15° - 22.5° - 30° - 36° - 45° and 90°. Saw blade length600mm Work table length 400mm Work table width 80mm Max. cut depth 120mm Max. cut width at 45°/100mm Max. cut width at 90°/170mm Mounted on stable, anti-slip wooden base. Supplied with one blade (for wood)....more info...less info
Additional screw clamp for side pressure. For fastening edge bands, strips, etc. A very practical accessory tool. Fits all sizes of screw clamps (supplied without normal screw clamp)....more info...less info
Max. load approx 150kg Max. clamp width 39 m Very sturdy, powder-coated frame Ergonomically shaped turning handles With integrated tool stripAt last, a professional clamping table at a sensible price. The sturdy frame is additionally powder-coated and thus offers the greatest protection against rust. This means the workbench is also suitable for outside work. The high-quality MDF boards (700 x 150 x 18mm) mean powerful clamping of the workpiece. There are 12 bore holes which let you clamp the widest range of shapes in association with the plastic jaws. Printed with a mm/cm rule on the wooden top for easy measuring of different lengths. Unfolded dimensions: 700 x 655 x 815mm, weight: approx. 10 kg, 10 year guarantee....more info...less info
Industrial Screw Clamp according to DIN 5117 screw clamp arms made from top-quality tempered metal GTW-40 DIN 1692. Glide tracks made from rack-drawn hollow profile steel, zincplated,fluted on both sides, DIN 1652. Plastic protection caps prevent scratches and pressure points on work pieces. Thread spindle with trapezoidal thread DIN 103, burnished. Fluted plastic screw clamp and hardwood handle increase hold and power transmission. TÜV/GS approved....more info...less info
Industrial Screw Clamp according to DIN 5117 screw clamp arms made from top-quality tempered metal GTW-40 DIN 1692. Glide tracks made from rack-drawn hollow profile steel, zincplated,fluted on both sides, DIN 1652. Plastic protection caps prevent scratches and pressure points on work pieces. Thread spindle with trapezoidal thread DIN 103, burnished. Fluted plastic screw clamp and hardwood handle increase hold and power transmission. TÜV/GS approved....more info...less info
A threaded clamp, with adjustable length. You need a 3/4" tube with thread on one side. The clamp is screwed up and the opposite retainer is fitted on. Firmly held in any position of the tube. Gripping surface of the jaws approx 38 x 32mm. Clamps with approx 60mm of play. Tube not supplied....more info...less info
This handy aid avoids the need for a "second pair of hands" Also suitable for starting off the installation (the first two or three boards). Simply push up flush the end of the slot comes out square on. Enormous time-saving. Length approx. 540 mm. Made from high-quality painted beechwood....more info...less info
A threaded clamp, with adjustable length. You need a 3/4" tube withthread on one side. The clamp is screwed up and the opposite retaineris fitted on. Firmly held in any position of the tube. Gripping surfaceof the jaws approx 38 x 32mm. Clamps with approx 60mm of play.Tube not supplied....more info...less info
Various adjustment possibilities: 1. 1. Ball guide allows movement in all directions (for working on band saw) 2. 2. V-guide: centred guidance for round profiles. Simple adjustment device.Continuous height adjustment from 65-115cm. Folds together for space-saving storage. Max. load 60kg...more info...less info
Mitering Vice. By pressing the ratchet device, singlehanded operation is possible. Galvanised rails with fluting on both sides Twocomponenthandle with non-slip effect for safe tensioning. Projection 60mm.Holds the most varied workpieces at a right angle up to a thicknessof 200mm. Ideal for gluing, soldering, welding, drilling, etc....more info...less info
Suitable as a normal screw clamp, vice, corner clamp or to transfix angled peaces. Range of base unit 45mm, range of screw clamp 60mm. Perfect for the hobbyist as well as the professional due to the versatility....more info...less info
The very tough tension ratchet makes this nylon belt so perfect for laying laminate, parquet and even for wood panelling, etc. Length 5mtr...more info...less info
Parquet and laminate pullbar for easy and successful joiningof the single elements. Heavy and sturdy design. Length approx. 450 mm....more info...less info
Clamps even the most awkward shaped parts easily and securely, whether they are round, octagonal or square shaped. Abig help when bonding, soldering, welding, etc. With approx. 4m of hard-wearing nylon belt. Spindle with tetragonal thread for secure and safe re-tensioning....more info...less info
Clamps a variety of work-pieces at precisely the right angle up to width of approx. 65mm. Easily adjustable with pressure button on the clamping measurement then simply tighten. Jaws width 65mm. Threaded spindle withtetragonal thread. Ideal for bonding, soldering, drilling, etc. Delivery in colour red....more info...less info
Saves requirement for a second person. For supporting and fixing loads during overhead assemblies. Numerous applications - simple to use. Continuously adjustable from 115 to 290cm. Permissible loads of up to 50 kg. Contactpressure up to 60 kg. No. 98 24 05 for 30 kg load....more info...less info
The "Infinite Clamps". A threaded clamp, with adjustable length. You need a 3/4" tube with thread on one side. The clamp is screwed up and the opposite retainer is fitted on. Firmly held in any position of the tube. Gripping surface of the jaws approx 38 x 32mm. Clamps with approx 60mm of play. Tube not supplied....more info...less info
This handy aid avoids the need for a "second pair of hands" Also suitable for starting off the installation (the first two or three boards). Simply push up flush the end of the slot comes out square on. Enormous time-saving. Length approx. 540 mm. Made from high-quality painted beechwood....more info...less info
Universal guide rail with integrated clamping jaws,suitable for compass saws, manual circular sawsand all brands of surface milling cutters. Evencompass saws become precision tools with thissawing rail Tension lever to close, and movableclamping jaws allow angles of up to 22.5°. Alsosuitable for bracing, gluing, holding and clamping.A real problem solver when it comes to reducingthe length of doors, etc. Max. clamping range:100 cm.Universal Guide Rail...more info...less info
Equally suitable for beams, boards and round bars. For drilling, cutting, sawing holes and grinding. For accurate horizontal work. Drills and cuts beams and boards in the absolute centre. Smoothly adjustable working depth. Comes complete with hand grip, depth stop, insert for smaller workpieces and return springs. Can be used with all drills with a 43mm Eurohals. (Supplied without drill)...more info...less info
Preview
